Kenmore Washer Repair in Albany, NY: Fixed by Who Really Built It
Kenmore did not build its own washers. Other makers built them and Sears sold them under the Kenmore name. That matters for repairs, because the parts and error codes come from the real maker. The first three digits of your model number tell us which one it is, and we repair it from there.
Last updated: October 2026
Kenmore washer acting up? Call for a free estimate and a same day visit in Albany.
Insured technicians. Free estimates. Same day appointments across Albany, NY.
Why Kenmore Owners Trust Us
We Decode Your Model Number
Your model prefix tells us the real maker, its code system, and its parts. We start there every time.
Insured for Your Protection
We carry liability insurance on every repair. You are covered while we work in your home or apartment.
We Work on Older Kenmores
Many Albany basements still run older Kenmore top loaders. We service them, as long as parts are available.
Who Made My Kenmore Washer?
Look at the first three digits of the model number. They point to the maker behind your Kenmore.
| Model Starts With | Built By | What That Means |
|---|---|---|
| 110 | Whirlpool | Whirlpool parts and the F and E code style on many models |
| 796 | LG | LG parts and LG style codes like OE and UE |
| 417 | Frigidaire or Electrolux | Frigidaire parts and E-number codes like E21 |
Not sure of your prefix? Text us a photo of the model label and we will tell you.
Common Kenmore Washer Problems by Maker
Each Kenmore family shares the weak spots of the washer it was based on.
Kenmore 110: Whirlpool-Built
The most common Kenmore in older Albany homes. Typical repairs are lid switches, couplings, agitator dogs, and drain pumps. See our Whirlpool washer repair page for the shared parts.
Kenmore 796: LG-Built
These front loaders use LG parts and LG codes. Drain filters, door locks, and motor sensors are the usual repairs. See our LG washer repair page.
Kenmore 417: Frigidaire-Built
These use Frigidaire and Electrolux parts. Drain codes, door locks, and belts are common. See our Frigidaire washer repair page.
Common Kenmore Washer Problems We Fix
Typical Albany repair costs for the Kenmore problems we see most.
| Problem | Usual Cause | Typical Cost |
|---|---|---|
| Fills but won’t agitate or spin | Lid switch, coupling, or belt | $100 to $220 |
| Won’t drain | Clogged filter or drain pump | $150 to $300 |
| Agitator top slips | Worn agitator dogs | $120 to $250 |
| Front loader door stays locked | Door lock or trapped water | $100 to $200 |
| Dead display or random codes | Control board or wiring | $200 to $450 |
Look up codes on our washer error codes page, using the maker your prefix points to.
Where Do I Find My Kenmore Model Number?
Kenmore model numbers look like three digits, a dot, then more digits, such as 110.12345678.
- Top loaders: under the lid, on the back of the control panel, or on the side of the cabinet
- Front loaders: around the door opening
- The digits before the dot are the maker code we use to order parts
Text us a photo of the label when you book.
Why Choose Us
Full Albany Coverage
We cover the whole city, from Center Square to Arbor Hill and Pine Hills to the South End. We also serve Colonie, Guilderland, Delmar, Latham, and East Greenbush.
Parts From the Real Maker
We order Kenmore parts by model number from the maker behind it, so they fit the first time.
Transparent Scheduling
You get a real time window, not an all-day wait. We call ahead before we arrive.
How Much Does Kenmore Washer Repair Cost in Albany?
Most Kenmore washer repairs in Albany run $100 to $450, depending on the part.
Lid switches, couplings, and agitator dogs sit at the low end. Control boards cost more. The table above shows typical ranges.
Is It Worth Repairing a Kenmore Washer?
Often, yes. Older Whirlpool-built Kenmore top loaders are simple and sturdy, and many repairs are inexpensive. A common guide is the 50 percent rule. If a repair costs more than half the price of a new washer, replacement often makes more sense.
Our estimate is always free.
Repair or Replace? We Will Tell You the Truth
If your washer is old and this is one of several failing parts, we will say so. We do not sell new washers, so we have no reason to push you either way.
We Are an Independent Repair Service
We repair Kenmore washers, but we are not affiliated with Kenmore, Sears, or the makers that built them. Kenmore is a trademark of its owner.
How Our Repair Process Works
You Call or Book Online
Share your full Kenmore model number and what the washer is doing.
We Schedule a Visit
We give you a real arrival window, often same day if you call early.
We Identify the Real Maker
We decode the prefix and use that maker’s codes and test steps.
We Test the Suspect Part
We test the switch, pump, valve, or board the symptoms point to.
You Approve the Price
You get a free written estimate. Nothing happens until you say yes.
We Repair and Run a Full Cycle
We run a full cycle to confirm the fix before we leave.
Our Services
We fix Kenmore washers that won’t spin, won’t drain, or won’t start. For a slipping agitator, see our agitator repair page. We also handle stacked washer and dryer units and commercial and multi unit properties.
Areas We Serve in Albany, NY
We cover every Albany neighborhood, including Pine Hills, Center Square, Downtown Albany, Washington Park, Arbor Hill, the South End, Delaware Avenue, West Hill, and the SUNY Albany area. That includes ZIP codes 12203, 12206, 12207, 12208, and 12210.
Equipment We Use
We use the diagnostic mode of the maker behind your Kenmore when it has one. We test parts with multimeters and use manufacturer-matched parts whenever possible.
Our Guarantee
Every repair comes with a workmanship guarantee. If the same problem comes back within the guarantee period, we return and fix it at no extra charge.
Common Kenmore Repairs We See in Albany Homes
These are typical scenarios, based on how Kenmore calls usually play out in local homes.
South End Basement: Kenmore 110 Fills, Then Stops
An older Whirlpool-built Kenmore fills and sits silent. The lid switch arm has snapped. A new switch has it running the same visit.
Washington Park Condo: Kenmore 796 Shows OE
An LG-built Kenmore front loader stops with a drain code. The pump filter is full of lint. Clearing it fixes the drain.
West Hill Home: Kenmore 417 Door Code
A Frigidaire-built Kenmore will not start and shows a door code. The door lock is worn. A matched lock fixes it.
What Albany Customers Say
“Fast and honest service”
Our washer suddenly stopped starting, and we were worried it would need an expensive control board. The technician checked the outlet and door lock first and found the actual problem quickly. The repair was completed the same day, and the price was exactly what we were quoted.
Michael R., Albany, NY
“Fixed our washer on the first visit”
Our washer had power but would not start. The technician explained what he was testing and found a faulty lid switch. He had the part with him and fixed it during the appointment. Very professional and easy to work with.
Jennifer M., Pine Hills, Albany, NY
“Great experience from start to finish”
We called about a washer that would not start in our Albany apartment. They gave us a clear arrival window and kept us updated before arriving. The technician diagnosed the problem, gave us the price before doing the repair, and tested the washer before leaving.
David T., Center Square, Albany, NY
What to Ask Before Booking
Do You Know Who Built My Kenmore?
A good technician reads the model prefix before ordering anything.
Are Parts Still Available?
For older Kenmores, ask before work starts.
Is the Rest of the Washer Sound?
On an older machine, one repair only makes sense if the rest holds up.
Is the Estimate Written and Final?
A written price protects you from surprise charges.
Do You Guarantee the Repair?
Ask what happens if the same problem comes back.
Will You Test a Full Cycle?
The washer should run start to finish before the technician leaves.
Frequently Asked Questions
Who makes Kenmore washers?
Other makers built them for Sears. Model numbers starting with 110 are Whirlpool, 796 are LG, and 417 are Frigidaire or Electrolux.
Can I use Whirlpool parts on my Kenmore?
If your model starts with 110, many parts are shared with Whirlpool. Always match parts to your full model number.
Why does my Kenmore washer fill but not agitate?
On older Kenmore top loaders, a bad lid switch or a broken motor coupling is the usual cause.
How old is my Kenmore washer?
The serial number holds the build date, but the format depends on the maker. We can check it during the visit.
How much does Kenmore washer repair cost in Albany, NY?
Most Kenmore repairs run $100 to $450, depending on the part.
Do you repair old Kenmore washers?
Yes, as long as parts are available. Many older Kenmore top loaders are very repairable.
Get Your Kenmore Washer Fixed Today
Your Kenmore is a known machine once we read its model number. We find the real cause and give you a free estimate before any work begins. Visit our washer repair Albany NY homepage to see every service we offer.
Insured technicians. Free estimates. Same day appointments across Albany, NY.
Washer Repair Albany NY | washerrepairalbanyny.com